BENZALDEHYDE
BENZALDEHYDE
1. Product Identification
Synonyms: Benzoic aldehyde; benzenecarbonal
CAS No.: 100-52-7
Molecular Weight: 106.12
Chemical Formula: C6H5CHO
Product Codes: Analytyka: B2050R
2. Composition/Information on Ingredients
Ingredient CAS No Percent Hazardous
--------------------------------------- ------------ ------------ ---------
Benzaldehyde 100-52-7 99 - 100% Yes
3. Hazards Identification
Emergency Overview
--------------------------
WARNING! MAY CAUSE ALLERGIC SKIN REACTION. HARMFUL IF SWALLOWED OR
INHALED. AFFECTS CENTRAL NERVOUS SYSTEM. MAY CAUSE IRRITATION TO SKIN,
EYES, AND RESPIRATORY TRACT. COMBUSTIBLE LIQUID AND VAPOR.
-----------------------------------------------------------------------------------------------------------
Health Rating: 1 - Slight
Flammability Rating: 2 - Moderate
Reactivity Rating: 1 - Slight
Contact Rating: 1 - Slight
Lab Protective Equip: GOGGLES; LAB COAT; VENT HOOD; PROPER GLOVES; CLASS B
EXTINGUISHER
Storage Color Code: Red (Flammable)
-----------------------------------------------------------------------------------------------------------
Potential Health Effects
----------------------------------
Inhalation:
May cause irritation to the respiratory tract. Symptoms may include
coughing, sore throat, labored breathing, and chest pain. High
concentrations have a narcotic effect.
Ingestion:
May cause sore throat, abdominal pain, nausea, central nervous system
depression, convulsions, and respiratory failure. Estimated lethal dose 2
ounces.
Skin Contact:
May cause irritation with redness and pain. May cause allergic skin
reactions. May have a local anesthetic effect.
Eye Contact:
May cause irritation, redness and pain.
Chronic Exposure:
Chronic exposure may cause skin effects.
Aggravation of Pre-existing Conditions:
No information found.
4. First Aid Measures
Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Call a physician.
Ingestion:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never
give anything by mouth to an unconscious person. Get medical attention
immediately.
Skin Contact:
Immediately flush skin with plenty of soap and water for at least 15
minutes while removing contaminated clothing and shoes. Get medical
attention. Wash clothing before reuse. Thoroughly clean shoes before
reuse.
Eye Contact:
In case of contact, immediately flush eyes with plenty of water for at
least 15 minutes, lifting upper and lower eyelids occasionally. Call a
physician if irritation persists.
5. Fire Fighting Measures
Fire:
Flash point: 64C (147F)
Autoignition temperature: 192C (378F)
Flammable limits in air % by volume:
lel: 1.4
Combustible.
Explosion:
Above the flash point, explosive vapor-air mixtures may be formed. Vapors
can flow along surfaces to distant ignition source and flash back. Sealed
containers may rupture when heated. An explosion occurred after mixing
sodium hydrosulfite, aluminum powder, potassium carbonate and benzaldehyde.
Fire Extinguishing Media:
Water spray, dry chemical, alcohol foam, or carbon dioxide. Water spray may
be used to keep fire exposed containers cool, dilute spills to nonflammable
mixtures, protect personnel attempting to stop leak and disperse vapors.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved
self-contained breathing apparatus with full facepiece operated in the
pressure demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill. Remove all sources of ignition. Wear
appropriate personal protective equipment as specified in Section 8.
Isolate hazard area. Keep unnecessary and unprotected personnel from
entering. Contain and recover liquid when possible. Use non-sparking tools
and equipment. Collect liquid in an appropriate container or absorb with an
inert material (e. g., vermiculite, dry sand, earth), and place in a
chemical waste container. Do not use combustible materials, such as saw
dust. Do not flush to sewer!
7. Handling and Storage
Store in a tightly closed container. Protect against physical damage.
Outside or detached storage is preferred. Inside storage should be in a
standard flammable liquids storage room or cabinet. Separate from oxidizing
materials. Storage and use areas should be No Smoking areas. Containers of
this material may be hazardous when empty since they retain product
residues (vapors, liquid); observe all warnings and precautions listed for
the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
AIHA Workplace Environmental Exposure Limit:
8-hour TWA: 2 ppm; 15-min STEL: 4 ppm
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee
exposures below the Airborne Exposure Limits. Local exhaust ventilation is
generally preferred because it can control the emissions of the contaminant
at its source, preventing dispersion of it into the general work area.
Please refer to the ACGIH document, Industrial Ventilation, A Manual of
Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded, a full facepiece respirator with organic
vapor cartridge may be worn up to 50 times the exposure limit or the
maximum use concentration specified by the appropriate regulatory agency or
respirator supplier, whichever is lowest. For emergencies or instances
where the exposure levels are not known, use a full-facepiece
positive-pressure, air-supplied respirator. WARNING: Air purifying
respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat,
apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles. Maintain eye wash fountain and quick-drench
facilities in work area.
9. Physical and Chemical Properties
Appearance:
Clear, colorless liquid.
Odor:
Characteristic odor of volatile oil of almonds.
Solubility:
Soluble in 350 parts water.
Specific Gravity:
1.05 @ 15C/4C
pH:
No information found.
% Volatiles by volume @ 21C (70F):
No information found.
Boiling Point:
179C (354F)
Melting Point:
-26C (-15F)
Vapor Density (Air=1):
3.65
Vapor Pressure (mm Hg):
1 @ 26C (79F)
Evaporation Rate (BuAc=1):
No information found.
10. Stability and Reactivity
Stability:
Stable under ordinary conditions of use and storage. Turns yellow on
keeping. Oxidizes slowly in air to benzoic acid.
Hazardous Decomposition Products:
Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
Performic acid and other oxidizing materials. An explosion occurred after
mixing sodium hydrosulfite, aluminum powder, potassium carbonate and
benzaldehyde.
Conditions to Avoid:
Heat, flames, ignition sources and incompatibles.
11. Toxicological Information
Oral rat LD50: 1300 mg/kg;. Irritation data: skin rabbit, standard Draize,
500 mg/24H moderate; investigated as a tumorigen, mutagen.
--------\Cancer Lists\------------------------------------------------------
---NTP Carcinogen---
Ingredient Known Anticipated IARC Category
------------------------------------ ----- ----------- -------------
Benzaldehyde (100-52-7) No No None
12. Ecological Information
Environmental Fate:
When released into the soil, this material may leach into groundwater. When
released into the soil, this material may biodegrade to a moderate extent.
When released into water, this material may evaporate to a moderate extent.
When released into water, this material is expected to readily biodegrade.
This material has an estimated bioconcentration factor (BCF) of less than
100. This material is not expected to significantly bioaccumulate. When
released into the air, this material is expected to be readily degraded by
reaction with photochemically produced hydroxyl radicals. When released
into the air, this material is expected to have a half-life between 1 and
10 days. When released into the air, this material may be removed from the
atmosphere to a moderate extent by wet deposition.
Environmental Toxicity:
No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an
appropriate and approved waste disposal facility. Processing, use or
contamination of this product may change the waste management options.
State and local disposal regulations may differ from federal disposal
regulations.
Dispose of container and unused contents in accordance with federal, state
and local requirements.
14. Transport Information
Domestic (Land, D.O.T.)
-----------------------
Proper Shipping Name: BENZALDEHYDE
Hazard Class: 9
UN/NA: UN1990
Packing Group: III
Information reported for product/size: 4L
International (Water, I.M.O.)
-----------------------------
Proper Shipping Name: BENZALDEHYDE
Hazard Class: 9
UN/NA: UN1990
Packing Group: III
Information reported for product/size: 4L
International (Air, I.C.A.O.)
-----------------------------
Proper Shipping Name: BENZALDEHYDE
Hazard Class: 9
UN/NA: UN1990
Packing Group: III
Information reported for product/size: 4L
15. Regulatory Information
--------\Chemical Inventory Status - Part 1\---------------------------------
Ingredient TSCA EC Japan Australia
----------------------------------------------- ---- --- ----- ---------
Benzaldehyde (100-52-7) Yes Yes Yes Yes
--------\Chemical Inventory Status - Part 2\---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
----------------------------------------------- ----- --- ---- -----
Benzaldehyde (100-52-7) Yes Yes No Yes
--------\Federal, State & International Regulations - Part 1\----------------
-SARA 302- ------SARA 313------
Ingredient RQ TPQ List Chemical Catg.
----------------------------------------- --- ----- ---- --------------
Benzaldehyde (100-52-7) No No No No
--------\Federal, State & International Regulations - Part 2\----------------
-RCRA- -TSCA-
Ingredient CERCLA 261.33 8(d)
----------------------------------------- ------ ------ ------
Benzaldehyde (100-52-7) No No Yes
Chemical Weapons Convention: No TSCA 12(b): No CDTA: Yes
SARA 311/312: Acute: Yes Chronic: Yes Fire: Yes Pressure: No
Reactivity: No (Pure / Liquid)
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
WHMIS:
This MSDS has been prepared according to the hazard criteria of
the Controlled Products Regulations (CPR) and the MSDS contains
all of the information required by the CPR.
16. Other Information
NFPA Ratings:
Health: 2 Flammability: 2 Reactivity: 0
Label Hazard Warning:
WARNING! MAY CAUSE ALLERGIC SKIN REACTION. HARMFUL IF SWALLOWED OR INHALED.
AFFECTS CENTRAL NERVOUS SYSTEM. MAY CAUSE IRRITATION TO SKIN, EYES, AND
RESPIRATORY TRACT. COMBUSTIBLE LIQUID AND VAPOR.
Label Precautions:
Avoid contact with eyes, skin and clothing.
Avoid breathing vapor.
Keep container closed.
Use with adequate ventilation.
Wash thoroughly after handling.
Keep away from heat and flame.
Label First Aid:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Call a physician. If
swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give
anything by mouth to an unconscious person. Call a physician. In case of skin
contact, immediately flush skin with plenty of water for at least 15 minutes.
Remove contaminated clothing and shoes. Wash clothing before reuse. Call a
physician. In case of eye contact, immediately flush eyes with plenty of
water for at least 15 minutes while lifting lower and upper eyelids. Call a
physician if irritation persists.
Product Use:
Laboratory Reagent.
Revision Information:
Oct. 2003.
Disclaimer:
************************************************************************************************
ANALYTYKA provides the information contained herein in good faith but makes
no representation as to its comprehensiveness or accuracy. This document is
intended only as a guide to the appropriate precautionary handling of the
material by a properly trained person using this product. Individuals
receiving the information must exercise their independent judgment in
determining its appropriateness for a particular purpose. ANALYTYKA MAKES NO
REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO
WHICH THE INFORMATION REFERS. ACCORDINGLY, ANALYTYKA WILL NOT BE RESPONSIBLE FOR
DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.
************************************************************************************************